LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Engine Mechanical - 6.2L) >> In-Vehicle Repair >> Engine Oil Pressure (EOP) Switch >> Installation

Engine Oil Pressure (EOP) Switch: Installation

WARNING: This page is about a different car, the 2013 Ford F-350 Super Duty and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the EOP switch.

    • Stage 1: Tighten to 14 Nm (124 lb-in).
    • Stage 2: Tighten an additional 180 degrees.
  2. Connect the EOP switch electrical connector and attach the wiring harness retainer.
scientia non olet · About LEMON Manuals