LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Engine Mechanical - 6.2L) >> In-Vehicle Repair >> Crankshaft Pulley >> Removal

Crankshaft Pulley: Removal

WARNING: This page is about a different car, the 2013 Ford F-350 Super Duty and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the cooling fan shroud. For additional information, refer to ENGINE COOLING - GASOLINE ENGINES .
  3. Rotate the tensioner clockwise and remove the accessory drive belt from the crankshaft pulley.
    Fig 1: Rotating Tensioner Clockwise
    G06126189Courtesy of FORD MOTOR CO.
  4. Remove the crankshaft pulley bolt.
    • Discard the crankshaft pulley bolt.
  5. Using the 3 Jaw Puller and Step Plate, remove the crankshaft pulley.
    Fig 2: Removing Crankshaft Pulley
    G07404433Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals