LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (Engine Mechanical - 3.5L GTDI) >> In-Vehicle Repair >> Crankshaft Pulley >> Removal

Crankshaft Pulley: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. REFER to JACKING AND LIFTING .
  2. Remove the RH splash shield. REFER to FENDER SPLASH SHIELD .
  3. Remove the 3 twist lock retainers and the underbody air duct.
    G09069387
  4. Remove the accessory drive belt. Refer to ACCESSORY DRIVE BELT -- 3.5L GTDI .
  5. Remove the crankshaft pulley bolt and washer.
    • Discard the bolt.
      G09069388
  6. Remove the crankshaft pulley.
    G09069389
scientia non olet · About LEMON Manuals