Crankshaft Pulley: Removal
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- With the vehicle in NEUTRAL, position it on a hoist. REFER to JACKING AND LIFTING .
- Remove the RH splash shield. REFER to FENDER SPLASH SHIELD .
- Remove the accessory drive belt. REFER to ACCESSORY DRIVE BELT TENSIONER - 3.5L TI-VCT, 3.7L TI-VCT .
- Remove the crankshaft pulley bolt and washer.
- Using 303-D121, remove the crankshaft pulley.