Disassembly And Assembly: Engine: Notes
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL(S) DESCRIPTION
| 2, 200# FLOOR CRANE, FOLD AWAY 300-OTC1819E |
|
| 3 Jaw Puller 303-D121 |
|
| Adapter For 303-224 (Handle) 205-153T80T-4000-W |
|
| Alignment Pins, Transmission Fluid Pump 307-399 |
|
| Compressor, Piston Ring 303-D032D81L-6002-C |
|
| Dial Indicator Gauge With Holding Fixture 100-002TOOL-4201-C |
|
| Engine Lift Eye 303-1245 |
|
| Installer, Crankshaft Vibration Damper 303-102T74P-6316-B |
|
| Installer, Differential Bearing Cone 205-142T80T-4000-J |
|
| Installer, Front Cover Oil Seal 303-335T88T-6701-A |
|
| Installer, Front Seal 303-1251 |
|
| Seal Installer, Rear Main 303-1250 |
|
| Installer, Wheel Hub Bearing Cup 204-023T73T-1217-A |
|
| Spreader Bar 303-D089D93P-6001-A3 |
|
| Tool, Chain Tensioner Hold Down 303-1530 |
|
| Remover, Crankshaft Rear Oil Seal 303-519T95P-6701-EH |
|
| Remover, Oil Seal 303-409T92C-6700-CH |
|
| VCT Spark Plug Tube Seal Remover And Installer 303-1247 |
|
| Slide Hammer 307-005T59L-100-B |
|
| Strap Wrench 303-D055D85L-6000-A |
|
| Camshaft Holding Tools 303-1248 |
MATERIAL SPECIFICATIONS
| Item | Specification |
|---|---|
| High Temperature Nickel Anti-Seize Lubricant XL-2 |
- |
| Motorcraft® High Performance Engine RTV Silicone TA-357 |
WSE-M4G323-A6 |
| Motorcraft® Metal Surface Prep ZC-31-A |
- |
| Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada) XO-5W20-QSP (US); CXO-5W20-LSP12 (Canada) |
WSS-M2C945-A |
| Motorcraft® Orange Antifreeze-Coolant Concentrated VC-3-B (US); CVC-3-B2 (Canada); |
WSS-M97B44-D |
| Penetrating and Lock Lubricant (US); Penetrating Fluid (Canada) XL-1 (US); CXC-51-A (Canada) |
- |
| Motorcraft® Silicone Gasket Remover ZC-30 |
- |
| Thread Sealant with PTFE TA-24 |
WSK-M2G350-A2 |