Removal and Installation
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the convertible top headliner. For additional information, refer to CONVERTIBLE TOP HEADLINER .
- Remove the screws and the side rail(s) from the convertible top frame bows.
-
NOTE: Manually operate the convertible top frame before installing the headliner, to be sure the frame operates smoothly, without binding.
To install, reverse the removal procedure.
- Make sure the door glass and quarter glass correctly seal against the convertible top side rail. If adjustment is necessary, refer to GLASS, FRAMES AND MECHANISMS .