LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 (Wiper System & Washer System) >> Removal And Installation >> Washer Jet >> Installation

Washer Jet: Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the washer jet tab in the hood and press forward until a click is heard.
  2. NOTE: Verify the washer jet hose connector lock ring is in the locked position.

    Connect the washer jet hose to the washer jet.

  3. Position the hood insulator.
scientia non olet · About LEMON Manuals