LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Steering Column) >> Removal And Installation >> Steering Column Shroud >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the LH scuff plate trim panel and the LH A-pillar lower trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Remove the steering column opening trim panel. For additional information, refer to the INSTRUMENT PANEL -- EXPLODED VIEW .
  3. Remove the 4 bolts and the steering column opening trim panel reinforcement.
    • To install, tighten to 9 Nm (80 lb-in).
  4. NOTE: Release the upper steering column shroud by carefully pressing the sides inward.

    Remove the 3 lower steering column shroud screws, then separate and remove the upper and lower shrouds.

  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals