LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (Front Disc Brake System) >> Removal And Installation >> Front Brake Caliper - 2 Piston >> Installation

Front Brake Caliper - 2 Piston: Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the brake caliper and install 2 new guide pin bolts.
    • Tighten to 34 Nm (25 lb-ft).
  2. Using 2 new copper washers, position the brake flexible hose on the brake caliper and install the brake caliper flow bolt.
    • Tighten to 55 Nm (41 lb-ft).
  3. Bleed the brake caliper. For additional information, refer to BRAKE SYSTEM - GENERAL INFORMATION for Component Bleeding.
  4. Install the wheel and tire. For additional information, refer to WHEELS AND TIRES .
scientia non olet · About LEMON Manuals