Driveshaft - 5.8L (4V): Removal

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Do not drop the driveshaft, or damage to the driveshaft can occur. If the driveshaft is dropped, replace the driveshaft with a new one.

With the vehicle in NEUTRAL, position it on a hoist. Refer to JACKING & LIFTING .
Remove the LH exhaust intermediate pipe. Refer to EXHAUST SYSTEM -- MUSTANG .
NOTE: Use a deepwell socket to remove the driveshaft bolts, or damage to the CV boot can occur.
- To install, tighten the new bolts to 55 Nm (41 lb-ft).
- To install, tighten the new bolts to 55 Nm (41 lb-ft).