LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Steering Column Switches) >> Removal And Installation >> Steering Column Multifunction Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering column shroud. For additional information, refer to STEERING COLUMN .
  2. Disconnect the multifunction switch electrical connector.
  3. Remove the 2 screws and the multifunction switch.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals