Piston Ring-to-Groove Clearance
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS
|
|
Feeler Gauge Set
303-D027 (D81L-4201-A) or equivalent |
NOTE:
Refer to the appropriate Engine article
for the specification.
- Inspect the piston for ring land damage or accelerated wear.
Courtesy of FORD MOTOR CO.
- Using the Feeler Gauge Set, measure the piston ring-to-groove clearance.
Courtesy of FORD MOTOR CO.