Flywheel Inspection - 5.0L and 5.8L

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The flywheel cannot be resurfaced, it must be replaced.

Inspect the flywheel for:
1. any cracks.
2. worn ring gear teeth.
3. chipped or cracked ring gear teeth.
4. scratches, nicks and discoloration.
  
  Fig 1: Identifying Inspecting Flywheel Area
  Courtesy of FORD MOTOR CO.