Input Shaft Seal
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS
| Remover, Input Shaft Oil Seal 308-375 |
|
| Slide Hammer 100-001 (T50T-100-A) |
| Item | Part Number | Description |
|---|---|---|
| 1 | 7006 | Transmission case |
| 2 | 7048 | Input shaft seal |
- Remove the clutch slave cylinder. For additional information, refer to CLUTCH CONTROLS .
- Using the Input Shaft Oil Seal Remover and the Slide Hammer, remove and discard the input shaft seal.