LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Automatic Transmission (6R80)) >> Diagnosis And Testing >> Pinpoint Tests - OSC Equipped Vehicle >> Shift Solenoid Pre-Diagnosis

Shift Solenoid Pre-Diagnosis

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

Use the following shift solenoid operation information when carrying out Pinpoint Test A.

SOLENOID OPERATION CHART

Selector Lever Position PCM Commanded Gear Shift Solenoid TCC NL
SSA NL (1, 2, 3, 4) SSB NH (3, 5, R) SSC NL (CB 2, 6) SSD NH (CB L/R 4, 5, 6) SSE NC
P P Off On Off On On Off
R R Off Off Off Off On Off
N N Off On Off On (1) On(1) Off
D 1 On On Off Off (2) On Off
  2 On On On On Off Off
  3 On Off Off On Off Off
  4 On On Off Off Off On/Off
  5 Off Off Off Off Off On/Off
  6 Off On On Off Off On/Off
3 3 On Off Off On Off Off
2 2 On On On On Off Off
1 1 On On Off Off On Off
(1) Solenoid state changes if vehicle is moving forward with the selector lever in the NEUTRAL position.
(2) Solenoid is On when vehicle is above 3 mph.

CB = Clutch brake
NC = Normally closed
NH = Normally high
NL = Normally low
scientia non olet · About LEMON Manuals