DTC P0113: Intake Air Temperature Sensor 1 Circuit High (Bank 1)
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0113: INTAKE AIR TEMPERATURE SENSOR 1 CIRCUIT HIGH (BANK 1)
| Description: | This DTC sets when the intake air temperature (IAT) sensor signal voltage is greater than the maximum calibrated limit, the test fails. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An IAT11_V PID reading greater than 4.75 volts with ignition ON, engine OFF or during any engine operating mode indicates a concern. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST F . | ||