Roof Opening Panel Operation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

The roof opening panel assembly uses an integrated motor and module to operate the roof opening panel. The roof opening panel is an electronically operated glass panel that has one-touch open, one-touch close and one-touch vent features.

To open the roof opening panel, press and release the SLIDE control switch. The roof opening panel opens automatically. The roof opening panel movement can be stopped at any time by pressing the switch again.

To vent the roof opening panel, the roof opening panel must first be in the CLOSED position. When the roof opening panel is in the CLOSED position, press and release the TILT control switch. The roof opening panel moves to the VENT position automatically. To close the roof opening panel from the VENT position, pull and hold the TILT control switch until the glass panel stops moving.

To close the roof opening panel, pull and release the SLIDE or TILT control switch. The roof opening panel closes automatically. The roof opening panel movement can be stopped at any time by activating the SLIDE or TILT control switch in either direction.