DTC P2131: Throttle/Pedal Position Sensor/Switch F Circuit Range/Performance
P2131 - THROTTLE/PEDAL POSITION SENSOR/SWITCH F CIRCUIT RANGE/PERFORMANCE
| Description: This DTC sets when the accelerator pedal position (APP) sensor fault flag is set for sensor 3 by the PCM, indicating the signal is out of the normal self-test operating range. | |||
Possible Causes:
|
|||
| Diagnostic Aids: An APP3 sensor PID reading may indicate a concern. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DK . | ||