DTC P2127: Throttle/Pedal Position Sensor/Switch E Circuit Low
P2127 - THROTTLE/PEDAL POSITION SENSOR/SWITCH E CIRCUIT LOW
| Description: This DTC sets when the accelerator pedal position (APP) sensor 2 is out of self-test range low. | |||
Possible Causes:
|
|||
| Diagnostic Aids: An APP2 or APP_E sensor PID reading may indicate a concern. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DK . | ||