DTC P1114: Intake Air Temperature 2 (IAT2) Circuit Low (Supercharged/Turbocharged Engines)
P1114 - INTAKE AIR TEMPERATURE 2 (IAT2) CIRCUIT LOW (SUPERCHARGED/TURBOCHARGED ENGINES)
| Description: This DTC sets when the sensor signal is less than the self-test minimum which is 0.2 volt. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Monitor the IAT2 PID value. A typical IAT2 temperature should be greater than the IAT1 temperature. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DU . | ||