DTC P0336: Crankshaft Position Sensor A Circuit Range/Performance
P0336 - CRANKSHAFT POSITION SENSOR A CIRCUIT RANGE/PERFORMANCE
| Description: This DTC sets when the input signal from the crankshaft position (CKP) sensor is erratic. | |||
Possible Causes:
|
|||
| Diagnostic Aids: An inactive CKP signal causes a no start condition. Monitor the RPM PID while cranking the engine. A value of 0 RPM indicates a CKP concern. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST JD . | ||