DTC P0231: Fuel Pump Secondary Circuit Low
P0231 - FUEL PUMP SECONDARY CIRCUIT LOW
| Description: The PCM monitors the fuel pump monitor (FPM) circuit. The test fails if the PCM commands the fuel pump ON and B+ voltage is not detected on the FPM circuit. | |||
Possible Causes:
|
|||
| Diagnostic Aids: During the key ON engine OFF (KOEO) self-test, the PCM commands the fuel pump ON so this test can be carried out. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST KA . | ||