DTC P0123: Throttle/Pedal Position Sensor A Circuit High
P0123 - THROTTLE/PEDAL POSITION SENSOR A CIRCUIT HIGH
| Description: This DTC sets when the PCM indicates the electronic throttle control (ETC) throttle position (TP) sensor signal is too high. | |||
Possible Causes:
|
|||
| Diagnostic Aids: This concern exhibits a symptom of limited power. A TP1 PID reading greater than 4.75 volts in ignition ON, engine OFF or ignition ON, engine running indicates a concern is present. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DV . | ||