DTC P0108: Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor High
P0108 - MANIFOLD ABSOLUTE PRESSURE (MAP)/BAROMETRIC PRESSURE (BARO) SENSOR HIGH
| Description: This DTC sets when the sensor operating voltage is greater than the maximum allowable calibrated parameter of 4.96 volts. | |||
Possible Causes:
|
|||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| F-150 3.5L, Flex 3.5L GTDI, MKS 3.5L, MKT 3.5L, Taurus 3.5L GTDI |
GO to PINPOINT TEST DN . | ||
| All others | GO to PINPOINT TEST DM . | ||