DTC P0030: Ho2S Heater Control Circuit (Bank 1, Sensor 1)
P0030 - HO2S HEATER CONTROL CIRCUIT (BANK 1, SENSOR 1)
| Description: The PCM controls the heater on and off duty cycle to maintain a calibrated temperature. This DTC sets when the sensor does not warm up to the required temperature in a calibrated amount of time. This DTC also sets when the PCM is not able to maintain the required temperature after the sensor is warm. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Inspect the connectors for signs of damage, water ingress, or corrosion. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| E-Series 6.8L, Escape 2.5L Manual Transmission, Fiesta, Fusion 3.5L, Fusion 2.5L Manual Transmission, MKZ, Transit Connect |
GO to PINPOINT TEST DW . | ||
| All others | GO to PINPOINT TEST DZ . | ||