Oil Cooler: Removal

With the vehicle in NEUTRAL, position it on a hoist. REFER to JACKING AND LIFTING for lifting points.
Using hose clamp pliers, clamp the 2 oil cooler coolant hoses and remove the 2 coolant hoses from the oil cooler.

Fig 1: Locating Oil Cooler Coolant Hoses Clamps
Courtesy of FORD MOTOR CO.
Remove the oil filter and discard.

Fig 2: Removing Oil Filter
Courtesy of FORD MOTOR CO.
NOTE: If metal or aluminum is present in the oil cooler, mechanical concerns exist. Failure to correct these concerns may result in engine failure. To diagnose mechanical concerns, REFER to SYMPTOM CHART(S) .

Remove the 6 bolts and the oil cooler.

Fig 3: Locating Oil Cooler Mounting Bolts
Courtesy of FORD MOTOR CO.
Discard the oil cooler gasket and inspect the oil cooler. Clean and inspect all sealing surfaces.