LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Removal And Installation >> Thermostat Housing - 2.0L GTDI >> Removal

Thermostat Housing - 2.0L GTDI: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. REFER to Cooling System Draining, Filling and Bleeding - 2.0L GTDI .
  2. Fig 1: Locating Clamps On Hoses
    G08030243Courtesy of FORD MOTOR CO.
  3. Fig 2: Locating Thermostat Housing Screws
    G08030244Courtesy of FORD MOTOR CO.
    • 10 Nm (89 lb-in).
scientia non olet · About LEMON Manuals