Coolant Inlet Pipe - 3.5L Ti-VCT: Installation

NOTE: Use Motorcraft® Specialty Green Engine Coolant or. Use the same type of coolant that was originally used to fill the cooling system. Do not mix coolant types. Mixing coolant types degrades the coolant corrosion protection and may damage the engine or cooling system.

NOTE: Motorcraft® Specialty Green Engine Coolant is very sensitive to light. Do NOT allow this product to be exposed to ANY LIGHT for more than a day or two. Extended light exposure causes this product to degrade.

Lubricate the coolant outlet pipe O-ring seals with clean engine coolant and install the O-ring seals on the coolant outlet pipe.
Install the coolant outlet pipe and attach the thermostat housing.
Install the lower intake manifold. REFER to LOWER INTAKE MANIFOLD - 3.5L .