LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Removal And Installation >> Block Heater - 3.5L Ti-VCT >> Removal

Block Heater - 3.5L Ti-VCT: Removal

  1. Drain the cooling system. REFER to Cooling System Draining, Filling and Bleeding - 3.5L Ti-VCT .
  2. Detach the block heater electrical connector heat shield.
  3. Disconnect the block heater electrical connector.
  4. Remove the block heater.
scientia non olet · About LEMON Manuals