Network Message Chart
BCM NETWORK INPUT MESSAGES
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Dimmer switch status | FLM | The FLM sends a digital dimmer switch status to the BCM. The BCM then outputs networked illumination level messages and hardwired voltage outputs to control the illumination level. |
ATCM, HVAC MODULE AND IPC NETWORK INPUT MESSAGES
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Illumination dimming level | BCM | Used to command illumination level. |
ACM, APIM, FCIM AND FCDIMNETWORK INPUT MESSAGES
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Illumination dimming level | IPC | Used to command illumination level. |