LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Drive Axle/Differential >> Removal And Installation >> Stub Shaft Seal >> Installation

Stub Shaft Seal: Installation

  1. NOTE: Lubricate the new stub shaft seal with grease.

    Using the Front Axle Oil Seal Installer 205-350  (T95T-3010-A) and Handle 205-153  (T80T-4000-W), install the new stub shaft seal.

    Fig 1: Installing Stub Shaft Seal
    G06065012Courtesy of FORD MOTOR CO.
  2. Install the halfshaft assembly. REFER to HALFSHAFT .
scientia non olet · About LEMON Manuals