LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Rear Disc Brake System >> Removal And Installation >> Rear Disc Brake Shield >> Installation

Rear Disc Brake Shield: Installation

  1. Install the brake disc shield and the 3 bolts.
    • Tighten to 15 Nm (133 lb-in).
  2. Install the wheel hub and bearing. REFER to WHEEL BEARING AND WHEEL HUB - FRONT WHEEL DRIVE (FWD) or WHEEL BEARING AND WHEEL HUB - ALL WHEEL DRIVE (AWD) .
scientia non olet · About LEMON Manuals