LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Front Disc Brake System >> Removal And Installation >> Front Disc Brake >> Installation

Front Disc Brake: Installation

  1. Using specified brake parts cleaner, clean any residual sealant from the wheel knuckle and the brake caliper anchor plate.
  2. Use specified brake parts cleaner to clean the brake disc and hub mating surfaces.
  3. Apply a thin coat of anti-seize lubricant to the hub flange.
  4. Install the brake disc.
  5. Install a new brake disc screw.
    • Tighten to 20 Nm (177 lb-in).
  6. Position the brake caliper and brake caliper anchor plate assembly and install 2 new bolts.
    • Tighten to 150 Nm (111 lb-ft).
  7. Install the wheel and tire. REFER to WHEEL AND TIRE .
scientia non olet · About LEMON Manuals