Normal Operation and Fault Conditions

The SCCM uses a Hall-effect sensor integral to the motor to identify the current pedal position. The SCCM sends a reference voltage along the sensor feed circuit, through the Hall-effect sensor and back to the SCCM along the signal return circuit.

When the following DTCs  are set, the adjustable pedals enter a "jog mod". When the pedals are in jog mode, the memory system recall will not function from either the memory SET switch or the RKE feature. When the pedals are activated using the adjustable pedal switch, the motor will move the pedals for one second regardless of the length of time the button is actually pressed.