Symptom Chart: Adjustable Pedals

Diagnostics in this information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to ENGINE CONTROLS - DIAGNOSTIC METHODS (EXCEPT DIESEL & HYBRID) for information regarding Ford-specific diagnostic practices.

SYMPTOM CHART

Condition	Possible Sources	Actions
No communication with the SCCM	Fuse Wiring, terminals or connectors SCCM	REFER to DIAGNOSTIC ROUTINE G : The Steering Column Control Module (SCCM) Does Not Respond To The Scan Tool.
Adjustable brake pedal is inoperative or does not operate correctly using the pedal adjust switch	Foreign objects or material Fuse Wiring, terminals or connectors Pedal adjust switch Adjustable accelerator pedal and motor with attached cable SCCM	REFER to Diagnostic Routine D: The Adjustable Pedals are Inoperative or Do Not Operate Correctly - Using the Pedal Adjust Switch .
Adjustable brake pedal is inoperative or does not operate correctly using the memory SET switch buttons or the RKE feature	Foreign objects or material Fuse Wiring, terminals or connectors Memory SET switch Adjustable accelerator pedal and motor with attached cable Adjustable brake pedal and bracket RKE transmitter Incorrect SCCM configuration Incorrect SCCM configuration DSM SCCM BCM	REFER to Diagnostic Routine E: The Adjustable Pedals are inoperative or Do Not Operate Correctly - Using the Memory SET Switch Buttons or the Remote Keyless Entry (RKE) Transmitter .
The adjustable pedals only move in 1 second intervals	Wiring, terminals or connectors Adjustable accelerator pedal and motor with attached cable Incorrect SCCM configuration	REFER to Diagnostic Routine C : The Adjustable Pedals Only Move in 1-Second Intervals.