LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Sunroof - Roof Opening Panel >> Removal And Installation >> Roof Opening Panel Glass - Rear Fixed >> Removal

Roof Opening Panel Glass - Rear Fixed: Removal

NOTE: The roof opening panel motor(s) must be initialized when repairs are carried out on any part of the roof opening panel system, including whenever:
  • the roof opening sliding glass or power shade motor has been removed from the roof opening panel system.
  • the roof opening panel glass has been removed from the roof opening panel system.
  • the roof opening panel assembly has been removed from the vehicle.
  • a new roof opening sliding glass or power shade motor has been installed.
  • a new roof opening panel glass has been installed.
  • a new roof opening panel assembly has been installed.

REFER to Roof Opening Panel Motor Initialization - Sliding Glass Panel  and REFER to Roof Opening Panel Motor Initialization - Shade .

  1. Remove the roof opening panel frame assembly and place on a stable work surface. REFER to Roof Opening Panel Frame .
  2. Remove the 8 rear fixed glass panel screws and the fixed glass panel.
scientia non olet · About LEMON Manuals