LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats-Seating - 3RD Row >> Removal And Installation >> Seat >> Installation

Removal And Installation: Seat: Installation

  1. Install the third row seat and the 4 mounting bracket-to-floor bolts.
    • Tighten to 80 Nm (59 lb-ft).
  2. If equipped, connect the electrical connector and attach the wire harness retainers.
  3. Attach the 2 load floor supports.
  4. If equipped, disconnect the third row power fold seat control switch.
  5. Install the LH and RH quarter trim panels:

    REFER to QUARTER TRIM PANEL - WITH INFLATABLE SAFETY BELTS , or

    REFER to QUARTER TRIM PANEL - WITHOUT INFLATABLE SAFETY BELTS .

scientia non olet · About LEMON Manuals