LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats-Seating - 3RD Row >> Disassembly And Assembly >> Seat Backrest - Power >> Disassembly

Seat Backrest - Power: Disassembly

NOTE: For component identification and locations, REFER to Seat - Exploded View .
  1. Remove the affected seat backrest. For additional information, REFER to Seat Backrest - Power .
  2. Remove the backrest cover. REFER to Seat Backrest Cover - Power .
  3. Remove the backrest foam pad.
  4. Remove the head restraint in the following sequence.
    1. Detach the head restraint release cable and conduit from the backrest frame.
    2. Remove the 2 head restraint bolts.
      • To install, tighten to 5 Nm (44 lb-in).
    3. Remove the 2 head restraint nuts.
      • To install, tighten to 24 Nm (18 lb-ft).
    4. Remove the head restraint and route the cable out of the backrest frame.
scientia non olet · About LEMON Manuals