Seat Cushion Cover - 60 Percent: Removal

From under the seat, detach the cushion cover J-clips.

Fig 1: Locating Cushion Cover J-Clips
Courtesy of FORD MOTOR CO.
From under the seat, detach the seat cover retainer.

Fig 2: Locating Seat Cover Retainer
Courtesy of FORD MOTOR CO.
Pull the cushion cover outboard retainer out from between the cushion frame and riser.

Fig 3: Locating Cushion Cover Retainer Strip
Courtesy of FORD MOTOR CO.
Release the 2 cushion cover retainers from the rear of the cushion frame.

Fig 4: Locating Cushion Cover Retainers
Courtesy of FORD MOTOR CO.
NOTE: Use care when separating the cushion cover wires from the cushion foam pad clips or the clips can be torn from the cushion foam pad.

Turn the cushion cover inside out, disengage the cushion cover wires from the cushion foam pad clips and remove the cushion foam pad.