Subframe Bushings - Rear Differential, Rear: Removal

NOTE: There are 2 RDU rear bushings in the rear subframe. This procedure shows how to remove one bushing. The procedure for the remaining RDU bushing is identical.

Remove the RDU. REFER to AXLE ASSEMBLY .
NOTE: The RDU 204-618 /1 must be used to remove the bushing to make sure that it passes through the receiver cup.

NOTE: Make sure the RDU 204-616 /2 is positioned with the larger opening toward the bushing to act as the receiver cup.

NOTE: Make sure the arrow on the RDU 204-616 is pointed toward the rear subframe when removing the bushing.

Assemble the RDU 204-618 and the 204-616 to the rear subframe and press out the bushing.

Fig 1: Assembling Rear Drive Unit Bushing Remover/Installer To Rear Subframe
Courtesy of FORD MOTOR CO.