Subframe Bushings - Rear Differential, Front: Removal

NOTE: There are 2 RDU front bushings in the rear subframe. This procedure shows how to remove one bushing. The procedure for the remaining RDU bushing is identical.

Remove the RDU. REFER to AXLE ASSEMBLY .
NOTE: Make sure the RDU 204-618 /2 is positioned with the larger opening toward the bushing to act as the receiver cup.

NOTE: Make sure the arrow on the RDU 204-616 /2 is pointed toward the rear subframe when removing the bushing.

Assemble the RDU 204-618 and RDU 204-616 to the rear subframe and press out the bushing.

Fig 1: Identifying Subframe Front Bushings (For Rear Differential)
Courtesy of FORD MOTOR CO.