Pinpoint Test

1. Disconnect: Ignition Switch.
2. Select DRIVE.
3. Measure:

   Ignition Switch			Ground
   C250			Ground
   Pin	Circuit	Measurement / Action	Pin	Circuit
   3	CDC41 (WH/BN)		-	Ground

Is the resistance less than 3 ohms? 

1. Yes:  INSTALL a new ignition switch. REFER to Ignition Switch .
2. No  : GO to 2  .

1. Disconnect: Brake Shift Interlock.
2. Measure:

   Ignition Switch			Brake Shift Interlock
   C250			C2008
   Pin	Circuit	Measurement / Action	Pin	Circuit
   3	CDC41 (WH/BN)		1	CDC41 (WH/BN)

Is the resistance less than 3 ohms? 

1. Yes:  GO to 3  .
2. No  : REPAIR the circuit.

1. Measure:

   Brake Shift Interlock			Ground
   C2008			Ground
   Pin	Circuit	Measurement / Action	Pin	Circuit
   4	GD233 (BK)		-	Ground

Is the resistance less than 3 ohms? 

1. Yes:  INSTALL a new selector lever:

   REFER to SELECTOR LEVER , or

   For Select Shift, REFER to SELECTOR LEVER .

2. No  : REPAIR the circuit.