Pinpoint Test

1. Ignition OFF.
2. Disconnect: Inoperative Fog Lamp.
3. Ignition ON.
4. Place the headlamp switch in the parking lamps on position and activate the fog lamps.
5. Measure:

   Inoperative Fog Lamp			Ground
   Fog Lamp			Ground
   Connector-Pin	Circuit	Measurement / Action	Pin	Circuit
   Left C152-B	CLF12 (BN/YE)		-	Ground
   Right C162-B	CLF12 (BN/YE)		-	Ground

Is the voltage greater than 11 volts? 

• Yes: REPAIR the fog lamp ground circuit for an open.
• No: REPAIR the fog lamp voltage supply circuit for an open.