Symptom Chart: Autolamps

Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to DIAGNOSTIC METHODS for information regarding Ford-specific diagnostic practices.

SYMPTOM CHART

Condition	Possible Sources	Actions
A module does not respond to the scan tool	Fuse Wiring, terminals or connectors Module	REFER to SYMPTOM CHART: COMMUNICATION NETWORK .
The autolamps are inoperative	Light sensor BCM.	REFER to Diagnostic Routine K: The Autolamps Are Inoperative .
The autolamps are on continuously	Wiring, terminals or connectors Light sensor FLM. BCM.	REFER to Diagnostic Routine L: The Autolamps Are On Continuously .