Roof Opening Panel Glass - Front Sliding: Removal
NOTE:
The roof opening panel motor(s) must be initialized when repairs are carried out on any part of the roof opening panel system, including whenever:
- the roof opening sliding glass or power shade motor has been removed from the roof opening panel system.
- the roof opening panel glass has been removed from the roof opening panel system.
- the roof opening panel assembly has been removed from the vehicle.
- a new roof opening sliding glass or power shade motor has been installed.
- a new roof opening panel glass has been installed.
- a new roof opening panel assembly has been installed.
REFER to Roof Opening Panel Motor Initialization - Sliding Glass Panel and REFER to Roof Opening Panel Motor Initialization - Shade .
- Position the front sliding glass panel to the CLOSED position and the power shade to the full OPEN position.
- Unclip the top portion of the concertina blind and slide the concertina blind rearward to access the sliding glass screws.
- Remove the 4 front sliding glass panel screws.
- From the outside of the vehicle, remove the front sliding glass panel assembly.