LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer FWD V6-3.5L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Camshaft, Lifters and Push Rods >> Camshaft >> Service and Repair >> Procedures >> Camshaft Surface Inspection

Camshaft Surface Inspection




Camshaft Surface Inspection

General Procedure

1. Inspect camshaft lobes for pitting or damage in the contact area. Minor pitting is acceptable outside the contact area.





scientia non olet · About LEMON Manuals