Cover Seal: Installation

Assemble 205-907 , 308-431 and 308-221 (T94P-7025-BH) as shown in illustration.

Fig 1: Assembling Driver Handle, Halfshaft Oil Seal Installer And Shaft Bearing Cup Installer
Courtesy of FORD MOTOR CO.
Using the 205-907 , 308-431 and 308-221 (T94P-7025-BH), install the cover seal in the PTU.

Fig 2: Installing Cover Seal In PTU Using Driver Handle, Halfshaft Oil Seal Installer And Shaft Bearing Cup Installer
Courtesy of FORD MOTOR CO.
Install the intermediate shaft seal and deflector. REFER to Intermediate Shaft Seal and Deflector .
Fill the PTU as necessary. REFER to Power Transfer Unit (PTU) Draining and Filling .