LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (6F50/6F55) -- Explorer >> Diagnosis And Testing >> Automatic Transmission >> Symptom Chart

Symptom Chart

Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to DIAGNOSTIC METHODS for information about these practices.

In most circumstances the PCM sets DTCs to help guide with diagnostics. Refer to the DTC CHART-PCM  before using the symptom chart. The Condition column lists the vehicle condition. The Possible Sources column lists a detailed vehicle condition and the Action column lists the action to be performed to determine the cause of the condition. Each action lists the components that can cause the condition and the individual components in that system. The components are listed in order of disassembly. Use the list of components and the required action to focus on disassembly inspections for the root cause of the concern.

SYMPTOM CHART

Condition Possible Sources Action
  • Engagement Concerns
  • No Forward
  • No Reverse
  • Harsh Reverse
  • Harsh Forward
  • Delayed/Soft Reverse
  • Delayed/Soft Forward
  • No Forward and No Reverse
  • Delayed/Soft Forward and Reverse
  • Filter or pump assembly
  • Neutral after Launch
  • Low One Way Clutch.
  • Shift Concerns
  • No 1-2 Shift / Harsh / Soft/Slipping
  • No 2-3 Shift / Harsh / Soft/Slipping
  • No 3-4 Shift / Harsh / Soft/Slipping
  • No 4-5 Shift / Harsh / Soft/Slipping
  • No 5-6 Shift / Harsh / Soft/Slipping
  • Only Gears 1, 2, 3, 4 available
  • Only Gears 3 and 5 available
  • Only Gears 2 and 6 available
  • Only Gears 4, 5, 6 available
  • Only Gears 1 and R available
  • No Engine Braking in Low
  • Torque Converter Operation Concerns
  • No Apply
  • Torque converter system.
  • Always Applied (engine stalls)
  • Torque converter system.
  • Cycling/Shutter/Chatter
  • Torque converter system.
  • Other Concerns
  • Selector Lever High Effort
  • Filter or pump assembly.
  • External Leaks
  • Noise
  • Vibration
  • No Park Range
  • Transfer shaft or final drive.
  • Overheating