Pinpoint Test

MEASURE THE TREAD DEPTH
1. Using a tread depth gauge or similar tool, measure the inside edge/shoulder tread depth.
Is the tread depth greater than 1.588 mm (0.0625 in)?
- Yes: ROTATE the wheel and tire assemblies.
  CHECK and ADJUST the toe to nominal +0.15 degrees (toe in). CHECK and ADJUST caster and camber to nominal. REFER to SUSPENSION SYSTEM - GENERAL INFORMATION .
- No: INSTALL a new tire(s). CHECK and ADJUST the toe to nominal. CHECK and ADJUST caster and camber to nominal. REFER to SUSPENSION SYSTEM - GENERAL INFORMATION .