LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Safety Belt System >> Removal And Installation >> Safety Belt Buckle - 3rd Row >> Installation

Safety Belt Buckle - 3rd Row: Installation

  1. Install the safety belt buckle.
    1. Position the safety belt buckle and install the bolt.
      • Tighten to 40 Nm (30 lb-ft).
    2. Reposition the seat and position the seat back up.
    3. Install the inboard pivot covers.
  2. Check the active restraint system for correct operation. REFER to Functional Test - Safety Belt Buckle and Tongue .
scientia non olet · About LEMON Manuals